Loading...

Shop

Product Filters

Showing 1–12 of 33 results

  • From: £755.00

    Antonio Juliet Balcony

    For wider balconies we suggest using our Antonio range. This system can be fitted either through the base or the side of the channel. Included with our side fix channel is cladding to cover the fixing holes. It can be supplied to any width that you require. Our Antonio range is fully tested to 0.74kN when fixed to steel or concrete. 0.74kN is the weight per meter that a Juliet balcony is required to withstand in a single family dwelling. Should you require a higher line load test (for instance if your balcony is in an area where people may congregate) please contact our technical team. Our Antonio range is supplied using 15mm toughened glass.

  • From: £495.00

    Ariel Juliet Balcony

    Our Ariel range is one of the most popular Juliet balcony systems on the market. Easy to fit and unobtrusive, it can be used for any number of applications. All of the Juliet balconies in our Ariel range are fabricated by us to your exact requirements. Our technical team can advise you on all aspects of the design. We can then provide you with a full kit (including the glass). You simply have to install on site! This is all available on short lead times at unbeatable prices.

    Our draughtsman can help you design your Ariel balcony to your exact requirements. Once the design is complete, we will send you a drawing to confirm that you are happy with the measurements. This includes the size of the glass panels and where the holes should be in the glass. When agreeing the design, we will discuss with you the following:

    • The length and width of the balcony
    • What you are fixing to
    • Whether a mid post is required
    • The size of the glass panels and where the holes should be in the glass
    • Whether to use 42mm or 48mm tube and components
  • From: £4.75

    End Cap Flat

    End Cap Flat used for the construction of our Ariel Juliet Balcony.

    Our range of connectors, allows you to join tube to tube and tube to wall at any conceivable angle. If you are installing in tight corners or on uneven surfaces our products provide a practical solution to every challenge. All of our connectors are designed to fit perfectly with our tube.

  • From: £61.70

    Fixed Slab Bracket

    Our baluster brackets can accommodate either 42.4 mil or 48.3 mil tube. They are sold in either grade 304 or 316 stainless steel. You can purchase baluster brackets either with the angle of the bracket fixed or adjustable when fixed to the wall. The tube to be used with the baluster bracket is sold separately. Tube can be cut to any size that you require.

  • From: £225.00

    Flex Fit Base Drilled Channel System

    Origin Flex Fit is one of the most competitively priced channel systems on the market. Its sleek profile make it particularly popular for domestic applications. Flex Fit profiles can be supplied in both 2.5m and 5m lengths helping to minimise the waste on any installation and has an anodised coating which is salt water resistant.

  • £105.00 Excl. VAT

    Flex Fit Combitool

    Combitool for Flex Fit and Flex Fit Pro

    Origin Flex Fit is one of the most competitively priced channel systems on the market. Its sleek profile make it particularly popular for domestic applications. Flex Fit profiles can be supplied in both 2.5m and 5m lengths helping to minimise the waste on any installation and has an anodised coating which is salt water resistant.

  • £25.00 Excl. VAT

    Flex Fit Cover Cap

    Cover Cap for Flex Fit and Flex Fit Pro

    Origin Flex Fit is one of the most competitively priced channel systems on the market. Its sleek profile make it particularly popular for domestic applications. Flex Fit profiles can be supplied in both 2.5m and 5m lengths helping to minimise the waste on any installation and has an anodised coating which is salt water resistant.

  • £38.00 Excl. VAT

    Flex Fit End Cap for Side Cladding (Left)

    End Caps End Cap for Side Cladding (Left)

    Origin Flex Fit is one of the most competitively priced channel systems on the market. Its sleek profile make it particularly popular for domestic applications. Flex Fit profiles can be supplied in both 2.5m and 5m lengths helping to minimise the waste on any installation and has an anodised coating which is salt water resistant.

  • £38.00 Excl. VAT

    Flex Fit End Cap for Side Cladding (Right)

    End Caps End Cap for Side Cladding (Right)

    Origin Flex Fit is one of the most competitively priced channel systems on the market. Its sleek profile make it particularly popular for domestic applications. Flex Fit profiles can be supplied in both 2.5m and 5m lengths helping to minimise the waste on any installation and has an anodised coating which is salt water resistant.

  • £38.00 Excl. VAT

    Flex Fit End Cap Left

    Left end cap for flex fit channel 6011

    Origin Flex Fit is one of the most competitively priced channel systems on the market. Its sleek profile make it particularly popular for domestic applications. Flex Fit profiles can be supplied in both 2.5m and 5m lengths helping to minimise the waste on any installation and has an anodised coating which is salt water resistant.

  • £38.00 Excl. VAT

    Flex Fit End Cap Right

    Right end cap for flex fit channel 6011

    Origin Flex Fit is one of the most competitively priced channel systems on the market. Its sleek profile make it particularly popular for domestic applications. Flex Fit profiles can be supplied in both 2.5m and 5m lengths helping to minimise the waste on any installation and has an anodised coating which is salt water resistant.

  • £30.00 Excl. VAT

    Flex Fit End Caps

    End Caps for flex fit 6010

    200m x 200m

    Origin Flex Fit is one of the most competitively priced channel systems on the market. Its sleek profile make it particularly popular for domestic applications. Flex Fit profiles can be supplied in both 2.5m and 5m lengths helping to minimise the waste on any installation and has an anodised coating which is salt water resistant.

PLEASE NOTE: Measurement is taken from outside of profile to outside of profile.

Skyforce Top Mount according Test BS 6180 (0,74 kN/m)Tested to Aluminium
GLASS WIDTH UP TO GLASS THICKNESS (tempered glass) GLASS HEIGHT
1000mm 12.76mm 300mm – 1100mm
1700mm 16.76mm 300mm – 1100mm
3000mm 21.52mm 500mm – 1100mm
(According test BS 6180) Tested on the basis that the minimum thickness of the aluminium frame is 1.4mm.   FIXING TO PVC FRAME SkyForce Top Mount Tested to Plastic According to the German Standard ETB Directive
GLASS WIDTH UP TO GLASS THICKNESS (tempered glass) GLASS HEIGHT
1600mm 12.76mm 700mm-1200mm
2100mm 16.76mm (17.52) 900mm-1200mm
2600mm 21.52mm 800mm-1100mm
Tested on the basis that the metal insert in the frame is a minimum of 1.5mm in thickness. I attach a copy of the test report which is in German but which I think we can include anyway.   FIXING TO STEEL OR CONCRETE Skyforce is fully tested at a height of 1.1m up to a width of 3m when fixed to steel or concrete.
Glass H = Glass Height L = Glass Length Working Line Load
6.62 min. 300mm - max. 1100mm max. 1100mm 3.0 kN/m
6.62 min. 500mm - max. 1100mm max. 1100mm 3.0 kN/m
8.84 min. 300mm < 500mm max. 1100mm 3.0 kN/m
8.84 min. 500mm - max. 1100mm max. 1100mm 3.0 kN/m
8.84 min. 600mm - max. 1100mm max. 1700mm 1.5 kN/m
8.84 min. 300mm < 600mm max. 1700mm 0.74 kN/m
10.10.4 min. 300mm < 500mm max. 500mm 3.0 kN/m
10.10.4 min. 500mm - max. 1100mm max. 1100mm 3.0 kN/m
10.10.4 1100mm max. 3000mm 0.74 kN/m
10.10.4 min. 300mm < 1100mm max. 3000mm 0.36 kN/m
FIXED TO TIMBER OR STONE/BRICKWORK   No test data available.   For more comprehensive test data, click here
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.